What are the precautions for operating high-voltage lithium battery forklifts?
The preparation work before driving the high-voltage lithium-ion forklift is very important. With adequate preparation, work can go smoothly and safety incidents can be avoided. Drivers should wear work clothes in strict accordance with the regulations before using high-voltage lithium battery forklifts. You must also perform the following technical checks:
1. Check the height and specific gravity of the battery electrolyte. The level of battery electrolyte must not be lower than the separator. The specific gravity of the electrolyte should meet the requirements, the voltage of the battery should not be lower than the specified voltage, and the specific gravity of the electrolyte should not be lower than the specified specific gravity. 2. The high-voltage lithium electric forklift control system has the function of protecting the battery life. When the power supply on the meter shows undervoltage protection, it should be charged in time. Each electrode connector should be cleaned and tightened. Be sure to check that the electric forklift wire should be firmly connected and in good contact. Fuses should be intact and switches and handles should be in the stopped position. 3. Close the emergency stop switch, open the electric lock, check whether the instruments, lights, horns, etc. are working properly. Also check the steering mechanism, which should be flexible and light. Check the braking device, which should be flexible and reliable. Check whether the bearings and related operating parts are well lubricated and whether the movements are flexible.